- About Us
- Our Yachts
- New Projects
- Log Book
- Contact Us
|BEAM - OVERALL:||3.97 m||13.02'|
|BEAM - AT CHINE||3.63 m||11.91'|
|DISPLACEMENT||13,225 kg||29,156 lbs|
|DEADRISE - TRANSOM||18.5°|
|DEADRISE - MIDSHIP||21°|
|LCB||59.5 %wl AT STA 0|
The SURFARI 50 features a fully enclosed, heated and air-conditioned helm station. This covered space provides full, all-weather comfort where one controls the triple or optional quad installed 400 HP Mercury Verado JPO outboard engines. The standard triple engine configuration reaches a top speed of 58 MPH and a cruising speed of 42 MPH. The engines are controlled by a Mercury Joystick control and Skyhook station allowing the ability to adjust direction or maintain a stationary position against the wind, waves or currents.
A Seakeeper active control gyrostabilizer system is installed to eliminate up to 95% of the roll at anchor or underway, thereby reducing fatigue and eliminating the normal causes of seasickness. There is a 7.5 kW Westerbeke MCGA low-C generator installed in the insulated machinery space to provide power to the Seakeeper and a 32,000 BTU air-conditioning system.
The hull and deck are engineered and built to meet ISO 9001 certification from Bureau Veritas, CE Mark Category B Ocean. The hull, deck, and superstructure are laminated with low viscosity epoxy resin with e-glass composite construction and carbon fiber reinforcements. The entire hull and deck structure are post-cured in a specially built oven at 180 degrees for 24 hours.
The SURFARI 50 is set up perfectly for coastal cruising. The interior features an open floor plan with a compact, well-appointed galley, a private head with a stall shower and convertible port side settee/berth. A pair of sliding doors in front of the galley makes it possible to close off the forward berth for privacy. There is an aft cabin with double berth located under the helm area providing a private space for invited overnight guests or extended family.